Flasher Controller Kit

An effective way of adding flashing white LEDs to a textiles project in a ready-to-experiment kit.

The controller unit is pre-programmed with 5 flashing patterns, selected by the built-in push button.

Contains: large PCB with LED, controller, push button; CR2032 battery; 2 x sewable LEDS; 2m of conductive thread.

Pre-built PCB, no soldering required.

Auto-off after 30 minutes.

Dimensions: Controller: 34 x 20 x 9mm. LEDs: 15 x 6.5 x 2.7mm (L x W x H).